These instructions apply to the Peugeot Traveller Mk1 (K0) 2016-present.
For other models, please choose your vehicle here.
The Peugeot Traveller’s 12V battery sits in the engine compartment. Disconnecting it — for storage, a battery change, or electrical work — needs a short safety wait, and a few things must be re-initialized afterward.
Before you disconnect
- Park on level ground, apply the parking brake, and select N (or P on the automatic).
- Make a note of your audio security code if you have one.
- Close the windows and all doors, and lock the van with the mechanical key blade.
- Switch off, remove the key, and wait 4 minutes for the systems to power down.
- Disconnect the negative (−) terminal first, then the positive (+). If you will work near airbags or seatbelt pretensioners, wait a further 5 minutes.
After reconnecting
Reconnect the positive (+) terminal first, then the negative (−). Then reset the clock and date, check the remote locking, and re-initialize the power windows and the electric sliding door (hold each window switch to the end of travel; open and close the sliding door once).
The Traveller’s starter battery is a 60 Ah / 640 A or 70 Ah / 760 A (EN) unit depending on specification — match the rating when replacing it.
Frequently asked questions
Where is the Traveller’s 12V battery?
In the engine compartment, under the bonnet.
Will I lose my radio or settings?
The clock, date and some comfort settings reset. Have your audio code to hand if your head unit asks for one.
What has to be re-initialized afterward?
The one-touch power windows and the electric sliding door, plus the clock. Driving a short distance lets the other systems re-learn.
Independent guide — not affiliated with Peugeot. Always follow your official service manual and safety precautions. Read our full disclaimer.